1.1 Metre White Infrared Bar Heater | LED Lighting | Built in Thermostat | 1500W | Remote control and Wifi

1500W Infrared Radiant Heating

A stainless-steel heating tube and an aluminium surface with a graphene coating provide radiant heating from a fixed high-level position.

Infrared energy transfers warmth towards people, objects and surrounding surfaces within its reach. Correct positioning and an output matched to the space's heating requirement help achieve comfortable results.

Integrated Dimmable LED Lighting

LED lighting runs along both sides of the heater, bringing illumination and heating together within one unit. The lighting has a separate 40W power rating.

Select warm white, neutral white or cool white to suit your space. The supplied remote provides lighting on/off control and adjustable brightness.

Heating and lighting have separate controls, allowing you to manage each function independently.

Remote Thermostat Included

The supplied wireless remote thermostat measures room temperature and sends commands to the heater to maintain your selected temperature.

Choose a target temperature between 5°C and 35°C. The remote also includes a keypad lock to help prevent accidental changes.

The remote uses four AAA batteries. Position it in an open location where it can measure room temperature accurately, keeping its sensor uncovered and away from direct heat.

Smart Life Wi-Fi Heating Control

Connect the heater to the Smart Life app using a 2.4GHz Wi-Fi network to manage heating from your smartphone.

• Switch heating on and off
• Adjust the target temperature
• Create weekly heating schedules
• Set a countdown to switch heating off
• Share app access with other registered users

Follow the supplied pairing instructions when connecting the remote thermostat and setting up Wi-Fi.

High-Level Wall or Ceiling Installation

This heater supports wall or ceiling mounting using the supplied articulating brackets. It must be installed at least 2.3 metres above floor level.

The brackets allow the heater's angle to be adjusted during installation and must be securely locked before use. The mounting structure and fixings must be suitable for the installation and securely support the heater's 5.9kg weight.

Installation must be completed by a qualified electrician, following the supplied instructions for mounting, electrical connection, cable routing and safety clearances.

White Finish and Aluminium Construction

The heater combines a white finish with an aluminium heating surface and aluminium rear construction, offering a clean appearance for suitable domestic and commercial interiors.

Its body measures 1126 × 220 × 110mm. A 1.9-metre power cable is included and should be routed through the designated cable-routing groove as instructed, keeping it clear of hot surfaces.

Operating Temperature and Safe Use

The heating surface operates at approximately 330–350°C. High-level installation, correct positioning and the required safety clearances are essential.

Keep the heater uncovered and clear of curtains and other combustible materials. Do not use an extension lead or operate the heater in wet conditions.

10-Year RADI8 Warranty

The RADI8 1500W white infrared bar heater with LED lighting is backed by a 10-year RADI8 warranty.

Choosing the Right Heating Output

The heating requirement depends on room dimensions, ceiling height, insulation, glazing and intended use. Mounting position also affects how radiant warmth reaches the occupied area.

Use our Infrared Heating Wattage Calculator to estimate your space's heating requirement, or contact our team for help selecting the right heating arrangement.