High Power Ceiling Mounted Infrared Heating Panel | (870x620mm) 1900W

Q: How much does infrared heating cost to run?

Running cost depends on heater wattage, electricity tariff and operating time. A 1kW heater uses 1kWh of electricity when operating continuously at full power for one hour. Thermostatic controls can cycle the heater on and off to maintain the selected room temperature.

SKU CP8762GT1900

Agotado

£495.00 - £495.00

£495.00

£495.00 - £495.00

£495.00

Disponibilidad:

Agotado

Características principales

1900W High Power Infrared Heating
Ceiling-Mounted Space-Saving Design
Aluminium Heating Tube with IR-Coated Surface
External Thermostat Control Available Separately
870 × 620mm Panel Dimensions
10-Year RADI8 Warranty

Not sure which wattage you need? Every space is different. Calculate the recommended heating requirement for your room.

Calculate my wattage

COMPARE OTHER OPTIONS IN THIS RANGE

Other options available Compare sizes, outputs and prices from this product range.

Free UK delivery

View delivery details

High Power Ceiling Mounted Infrared Heating Panel | (870x620mm) 1900W £495.00

PRODUCT DETAILS

1900W High-Powered Infrared Ceiling Panel

The RADI8 1900W high-powered infrared ceiling panel delivers radiant warmth from above while keeping walls and floors clear. Its white aluminium frame provides a discreet heating solution for suitable domestic and commercial interiors.

An aluminium heating tube and infrared-coated aluminium surface deliver radiant heat towards people, objects and surrounding surfaces, without relying on a fan to circulate heated air around the room.

Measuring 870 × 620 × 55mm and weighing 10.8kg, this panel is designed for fixed ceiling installation using the supplied mounting brackets. It must be installed at least 2.3 metres above floor level and is not suitable for wall mounting.

This model has no built-in thermostat and can be paired with a suitable separate heating control. Installation must be completed by a qualified electrician, following the supplied instructions.

High-Powered Heating from Above

With a 1900W heating output, this panel provides a higher-output option for spaces where the calculated heating requirement calls for additional power.

Ceiling installation leaves valuable wall and floor space available for furniture, equipment and storage. The number and position of panels required will depend on the room's dimensions, insulation, layout and heat loss.

Aluminium Infrared Heating Technology

The panel combines an aluminium heating tube with an infrared-coated aluminium heating surface to produce radiant warmth.

Infrared energy transfers heat towards people and surrounding surfaces within its reach, providing warmth without fan-driven airflow.

Fixed Ceiling Installation

This model is designed for ceiling mounting only. The supplied brackets provide a mounting arrangement for suitable concrete or plasterboard ceilings, using the appropriate fixings and installation method.

The ceiling and fixing points must be capable of securely supporting the panel's 10.8kg weight. Plasterboard thickness and fixing suitability must be checked against the supplied instructions before installation.

Install the heater at least 2.3 metres above floor level. It must not be wall mounted, suspended by its power cable or attached using adhesive.

Separate Thermostat Control

This panel has no built-in thermostat, Wi-Fi controller or remote control. A suitable external heating control can be used to regulate the room temperature.

Pair it with our Smart Wi-Fi Thermostat, available separately, for room temperature control, programmable heating schedules and app control.

Position the thermostat or temperature sensor outside the panel's direct radiant heating area so that it can measure the room temperature accurately.

Surface Temperature and Positioning

The heating surface operates at approximately 280°C. This is a high-temperature ceiling heater and must be positioned to prevent accidental contact.

Keep the panel uncovered and maintain the positioning and safety clearances specified in the supplied instructions. Keep curtains, furnishings, cables and other combustible materials clear of the heater.

The instructions recommend maintaining at least 1.5 metres between the heater and people during use and avoiding prolonged direct exposure of the same body area.

Professional Electrical Installation

Installation must be completed by a qualified electrician, including the electrical connection and any external thermostat wiring.

The panel includes a 1.9-metre power cable. Route the cable through the designated cable-routing groove and keep it off the rear surface of the heater. Do not use an extension lead.

Remove the front protective film before first use and follow the supplied instructions for mounting, electrical connection and operation.

Choosing the Right Heating Output

The required heating output depends on room dimensions, ceiling height, insulation, glazing and building construction. A fixed floor-area rating cannot account for all of these factors.

Use our Infrared Heating Wattage Calculator to estimate your room's heating requirement, or contact our team for help planning the number and position of panels.

Specifications

Wattage 1900W

Dimensions(mm) 870 x 620 x 55

Weight 10.8kg

Colour White

Heating Element Aluminium heating tube

Surface Material Aluminium with infrared coating

Frame White aluminium

Voltage 220-240V/50Hz

Surface Temperature Approximately 280°C

Cable Length 1.9m

Built-in Thermostat No

Control Suitable external thermostat available separately

Recommended Fixing Ceiling only

Minimum Installation Height 2.3m above floor level

Included Accessories Mounting brackets and ceiling fixings

Installation Qualified electrician required

Warranty 10 years

Controls & Accessories

Delivery & Returns

Mainland UK Delivery
Orders are normally dispatched on a next working day delivery service once your order is ready to leave us.

Non-Mainland UK
Deliveries to non-mainland UK locations typically take 3–5 working days.

International Delivery
For Ireland and international orders, please contact our team for delivery options and shipping costs.

30-Day Returns
Changed your mind? Eligible products can be returned within 30 days in accordance with our Returns Policy

View Returns Policy

Installation & Maintenance

Ceiling installation only

The RADI8 1900W high-powered infrared ceiling panel must be installed by a qualified electrician. It is suitable for fixed ceiling mounting only and must not be wall mounted.

Mounting and ceiling suitability

Install the panel at least 2.3 metres above floor level, using the supplied brackets and the correct fixings for the ceiling construction.

The ceiling and fixing points must securely support the panel’s 10.8kg weight. The instructions cover suitable concrete and plasterboard ceilings. The supplied spring-toggle fixings are specified for suitable boards 9–18mm thick; do not use them on plasterboard thinner than 9mm.

Follow the supplied mounting instructions and secure all bracket connections before connecting the electrical supply. Never suspend the panel by its cable or use adhesive to support it.

Electrical connection and heating controls

The panel requires a 220–240V / 50Hz supply and has no built-in thermostat. Your electrician should arrange the electrical connection and any suitable external thermostat wiring.

Position the thermostat or temperature sensor outside the panel’s direct radiant heating area.

Route the 1.9-metre power cable through the designated cable-routing groove. Do not rest the cable on the rear surface of the panel or use an extension lead.

Positioning and first use

The heating surface operates at approximately 280°C. Keep the heater uncovered, prevent accidental contact and maintain all clearances specified in the supplied instructions.

The instructions recommend at least 1.5 metres between the heater and people during use. Avoid prolonged direct exposure of the same body area.

Remove the front protective film before first use.

Calentadores infrarrojos de montaje en techo installed in an interior

Advanced Infrared

Radiant warmth is delivered directly into the room without relying on forced-air circulation.

Sleek Design

A slim, contemporary profile designed to integrate neatly into modern interiors.

Easy Installation

Designed for straightforward installation with mounting options suited to the heater and application.

Discreet Heating

Free up valuable floor space with heating designed around your room rather than traditional radiators.

Comfortable Radiant Warmth

Infrared technology delivers radiant warmth without relying on fans or forced-air circulation.

Efficient Zone Heating

Heat individual rooms or areas independently, giving you greater control over where heating is used.

HEATING CONTROLS

Heating Controls

Add Smart Wi-Fi Control

This RADI8 1900W high-powered ceiling panel does not have a built-in thermostat.

Pair it with our Smart Wi-Fi Thermostat, available separately, to add room temperature control, programmable heating schedules and Wi-Fi app control.

A qualified electrician must complete the electrical installation and external thermostat connection. Position the thermostat outside the panel's direct radiant heating area and follow the supplied installation instructions.

Domestic applications

Comfortable, discreet heating solutions designed around the way you use your home.

Commercial applications

Practical infrared heating for commercial, industrial and specialist environments.

Offices

→

Retail Shops

→

Hotels

→

Care Homes

→

Not sure where to start?

Explore our complete guide to infrared heating by room, building type and application.

Explore all applications →

Diagram showing how infrared heating warms people and surrounding surfaces

UNDERSTANDING INFRARED

How does infrared
heating work?

Infrared heating works differently from conventional convection heating. Rather than relying primarily on warming and circulating the air, infrared transfers radiant heat directly to people and surfaces within the room.

These surfaces absorb the radiant energy and gradually release warmth back into the space, helping create a comfortable and consistent heating environment.

With no fans or forced-air circulation, infrared heaters operate silently while delivering comfortable radiant warmth into the space.

01 Radiate

Infrared energy travels from the heater.

02 Absorb

People and surfaces absorb the radiant warmth.

03 Warm

Surfaces help release warmth back into the room.

Read our complete infrared heating guide →

Efficient Heating

Radiant heat can be directed where it is needed rather than relying solely on warming and circulating the air.

No Forced Air

With no fans required, infrared heating avoids the continuous forced-air circulation associated with many conventional systems.

Radiant Comfort

Infrared warms people and surrounding surfaces directly, creating a comfortable radiant warmth throughout the space.

Individual Room Control

Divide heating into zones so individual rooms or areas can be controlled according to how and when they are used.

Responsive Warmth

Radiant warmth is delivered directly into the occupied space once the heater reaches operating temperature, without relying on forced-air circulation.

Low Maintenance

With no pumps, fans or complex moving components in the heater, ongoing maintenance requirements are minimal.

Silent Operation

No fans or motors means heating operates silently, making infrared particularly suited to bedrooms, offices and quiet spaces.

Warms Surfaces

By warming walls and other surfaces directly, infrared can help keep surface temperatures warmer within the heated space.

International Delivery

Worldwide Shipping Available

We deliver infrared heating products across Europe and selected worldwide destinations, with fully tracked international shipping available.

European & Worldwide Delivery

FedEx Tracked Delivery

Residential & Commercial

International Support

NEED SOME HELP?

Expert guidance.
Real people, real advice.

Choosing the right infrared heating solution is about more than wattage alone. Our team can help you work out the right products, output and control setup for your space.

Already know your room dimensions? Use our free Wattage Calculator for an instant starting point.

Use the Wattage Calculator →

SPEAK TO OUR TEAM

CALL OUR TEAM 01204 520544 → EMAIL OUR TEAM info@infraredheatingsupplies.com →

UK Specialists Dedicated infrared heating expertise

10+ Years Experience helping customers find the right solution

01 How do I calculate what wattage I need?

The heating requirement depends on factors including room dimensions, insulation, construction and intended use. Use our Wattage Calculator to calculate the recommended heating requirement for your space.

02 Can infrared heaters be used in bathrooms?

Certain infrared heaters can be suitable for bathroom installations. The correct product and IP rating must be selected for the intended location, and installation must comply with applicable electrical requirements. Where required, installation should be completed by a suitably qualified electrician.

03 How much does infrared heating cost to run?

Running cost depends on the heater wattage, your electricity tariff and how long the heater operates. For example, a 1kW heater uses 1kWh of electricity when operating continuously at full power for one hour. Thermostatic controls can cycle the heater on and off as required to maintain the selected room temperature.

04 Do I need an electrician to install my heater?

This depends on the heater and installation method. Suitable plug-in models can simply connect to an appropriate socket. Hardwired installations, bathroom installations and electrical connections that form part of the fixed wiring should be completed by a suitably qualified electrician.

05 Are infrared heaters suitable for homes with children and pets?

Infrared heating is widely used in residential environments, but heaters can become hot during operation. Every heater should be installed, positioned and used in accordance with its instructions, with appropriate consideration given to children, pets and the surrounding space.

06 Can infrared heating help with condensation and damp?

Infrared heating warms people and surfaces directly, which can help maintain warmer surface temperatures and may help reduce conditions that contribute to surface condensation. However, damp and mould can have several causes, including ventilation, moisture and building defects, so heating alone should not be considered a solution to every damp or mould problem.