5ft Infrared Bar Heater | Built in Thermostat | 2400W | Remote control and Wifi

High-Output 2400W Infrared Heating

The 2400W model sits between our 1800W and 3000W infrared bar heaters, providing increased radiant output for larger spaces while retaining the slimline format of the RADI8 bar heater range.

It is particularly suited to applications where a higher heating output is required from each individual heater, helping reduce the number of heating units needed across larger installations.

Built-In Thermostat, Wi-Fi & Remote Control

Unlike the standard 2400W model, this version has its temperature controls integrated directly into the heater. The built-in digital thermostat allows you to set the required room temperature without installing a separate external thermostat.

The included remote provides convenient local control, while Wi-Fi connectivity allows compatible heating functions and schedules to be managed from your smartphone or tablet.

The smart controls also support Amazon Alexa and Google Assistant, providing additional flexibility when integrating the heater into a compatible smart environment.

Suitable for Larger Domestic & Commercial Spaces

The combination of its 2400W output and integrated controls makes this model particularly suited to larger heating zones, including:

• Large garages and workshops
• Production and trade areas
• Gyms and fitness spaces
• Commercial studios and halls
• Hospitality and restaurant areas
• Fully covered and enclosed outdoor dining areas

Where the heater is used in an outdoor application, the area must be fully covered and enclosed and the heater must not be directly exposed to rain or other weather conditions.

Silent, Light-Free Radiant Heating

The infrared heating element produces radiant warmth without fans or motors continuously circulating air around the room. Operation is therefore quiet and there is no visible red glow associated with some short-wave infrared heaters.

With no fan or motor required to distribute the heat, the heater also has minimal ongoing maintenance requirements.

Wall or Ceiling Mounted

The heater can be installed on a suitable wall or ceiling, allowing the radiant heat to be directed towards the required heating zone while keeping valuable floor space clear.

This mounting flexibility is particularly useful in workshops, commercial premises and other larger spaces where floor-standing heaters or conventional radiators may interfere with the usable layout.

Installation & Electrical Connection

For a permanent infrared heating installation, we recommend having the heater professionally hardwired by a qualified electrician in accordance with the supplied instructions and applicable electrical regulations.

The heater should be mounted at a minimum height of 1.8 metres, with the final mounting position and clearances determined by the installation environment and the requirements provided in the supplied manual.

For outdoor use, the heater must only be installed in a fully covered and enclosed area, protected from direct rain and weather exposure.

10-Year RADI8 Warranty

The RADI8 2400W infrared bar heater is designed as a long-term heating solution for demanding domestic and commercial applications and is backed by a 10-year warranty.

Is 2400W the Right Output for Your Space?

Heater sizing should not be based on floor area alone. Room dimensions, ceiling height, insulation, glazing, construction, airflow and intended use can all affect the amount of infrared heating required.

Use our Infrared Heating Wattage Calculator to estimate the heating requirement for your space and determine whether the 2400W model or another RADI8 infrared heater is more appropriate.