Infrared Bathroom Heater & Towel Warmer | Built in Wifi Thermostat | 1230W

Our Highest-Output Infrared Bathroom Heater

At 1230W, this is the largest and highest-output model within the RADI8 infrared bathroom towel-heater range.

It is designed for larger bathrooms and spaces with a greater calculated heating requirement than the smaller 530W and 730W models, while retaining the same space-saving wall-mounted format.

Rather than relying on a fan to distribute heated air, the infrared element radiates warmth towards people and surrounding bathroom surfaces.

Integrated 30W Towel Warmer

Alongside its room-heating function, this model incorporates a dedicated 30W towel-warming bar.

Towels can be positioned on the integrated bar for gentle warming and drying, giving you a practical combination of bathroom heating and warm towels from one wall-mounted unit.

Built-In Wi-Fi Thermostat & Touch Control

The heater incorporates its own built-in Wi-Fi thermostat, so a separate external thermostat is not required for normal heating control.

Temperature settings can be managed directly from the heater using the integrated touch controls or remotely through your smartphone.

The smart control system also supports heating schedules, allowing the bathroom temperature to be managed around your daily routine.

Graphene Carbon Infrared Heating

The heating system uses graphene carbon technology to generate far infrared radiant warmth.

Because the heater does not require a fan or moving parts to distribute heat, operation is silent and there is no fan-driven airflow within the bathroom.

IP54 Rated for Bathroom Installation

The heater carries an IP54 rating, providing protection against splashing water and making it suitable for installation in appropriate bathroom locations.

Its corrosion-resistant, powder-coated aluminium construction is designed for humid bathroom environments, while the white finish allows the heater to integrate cleanly with both contemporary and traditional interiors.

The final installation position must comply with the supplied installation instructions and applicable electrical and bathroom-zone requirements.

Tall, Slimline Wall-Mounted Design

Measuring 1250mm high × 612mm wide × 110mm deep, this model provides substantially greater heating output while retaining a relatively slim wall-mounted profile.

Its vertical format is particularly useful in larger bathrooms where additional heating capacity is required without occupying valuable floor space.

Professional Bathroom Installation

This heater is designed for wall-mounted bathroom installation.

Installation should be completed by a qualified electrician in accordance with the supplied installation instructions, applicable electrical regulations and bathroom-zone requirements.

All specified mounting positions, electrical requirements and safety clearances supplied with the heater must be followed.

10-Year RADI8 Warranty

The RADI8 1230W infrared bathroom heater and towel warmer is backed by a 10-year RADI8 warranty, providing long-term reassurance for your bathroom heating installation.

Which RADI8 Bathroom Heater Do You Need?

With 530W, 730W and 1230W bathroom models available, the appropriate heater should be selected according to the actual heating requirement of the room rather than using a fixed square-metre rating.

Bathroom dimensions, ceiling height, insulation, glazing, external walls and building construction can all influence the required heating output.

Use our Infrared Heating Wattage Calculator to estimate the heating requirement for your bathroom and determine which RADI8 bathroom heater is best matched to the space.