Infrared Bathroom Heater & Towel Warmer | Built in Wifi Thermostat | 530W

Bathroom Heating & Towel Warming in One

This model combines two functions within one wall-mounted bathroom heater. The main 500W infrared heating element provides radiant heating into the room, while approximately 30W is dedicated to the towel-warming function.

The integrated towel bar allows towels to be positioned directly on the heater for gentle warming and drying while the main infrared element provides heat to the surrounding bathroom.

Built-In Wi-Fi Thermostat & Touch Control

A Wi-Fi thermostat is built directly into the heater, so a separate external thermostat is not required for normal operation.

Settings can be adjusted using the integrated touch controls or through the compatible smartphone app, providing convenient control over your bathroom heating and scheduling.

This integrated control system keeps the installation visually clean while giving you greater flexibility over when and how the bathroom is heated.

Graphene Carbon Infrared Heating

The main heating element uses graphene carbon technology to produce far infrared radiant heat towards people and surrounding bathroom surfaces rather than relying on a fan to circulate heated air.

With no fan required for heat distribution, the heater operates silently, making it well suited to modern bathrooms, en-suites and other residential bathroom spaces.

IP54 Rated for Bathroom Installation

The heater has an IP54 rating, providing protection against splashing water and making it suitable for installation in appropriate bathroom locations.

Its powder-coated aluminium construction is designed for use in bathroom environments, while the white finish gives the unit a clean, understated appearance alongside contemporary bathroom fittings.

Bathroom electrical installations must always comply with the applicable electrical and bathroom-zone requirements. The supplied installation instructions should be followed when determining the final mounting position.

Compact Wall-Mounted Design

At 650mm × 612mm × 110mm, the heater combines room heating and towel warming without occupying valuable floor space.

The unit weighs approximately 8.7kg and is manufactured from powder-coated aluminium. It is supplied with a 1.2m cable and is designed specifically for wall-mounted installation.

Installation & Bathroom Safety

This heater is designed for wall mounting only and must not be ceiling mounted.

It should be installed at least 600mm above floor level and positioned in accordance with the supplied bathroom installation and electrical safety requirements.

The heater should be professionally installed by a qualified electrician, particularly because it is being installed within a bathroom environment.

The stated operating surface temperature is approximately 85–110°C. All required mounting clearances and safety instructions supplied with the heater must therefore be observed.

Certified & Protected

The heater carries UKCA, CE and RoHS conformity markings and incorporates protection appropriate to its intended bathroom application.

Always follow the supplied operating, installation and maintenance instructions to ensure the heater is installed and used correctly.

10-Year RADI8 Warranty

The RADI8 530W infrared bathroom heater and towel warmer is backed by a 10-year RADI8 warranty, providing long-term reassurance for your bathroom heating installation.

Is 530W Right for Your Bathroom?

Bathroom heating requirements vary according to room dimensions, ceiling height, insulation, external walls, glazing and building construction, so we don't recommend selecting a heater using a fixed square-metre figure alone.

Use our Infrared Heating Wattage Calculator to estimate the heating requirement for your bathroom and determine whether this 530W model provides the appropriate output.